• About STEINEL
  • Products
  • Resources
  • Sales
  • Tech Support
  • Press
Home >  Lighting Controls >  Resources >  Data Sheets >  Wall Switch Occupancy Sensors > 

Wall Switch Occupancy Sensors    
Data Sheets
IR WLS DIM    
Passive Infrared Wall Switch Vacancy Sensor

The IR WLS DIM is a line voltage, Passive Infrared (PIR) wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. Control options via Smart Remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.  

US WLS DIM    
0-10 V Dimming Ultrasonic Wall Switch Occupancy Sensor

The US WLS DIM is a line voltage, Ultrasonic (40 kHz) wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. Ultrasonic is used where the sensor may not have a clear line of site of the occupants in the desired coverage area. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.  

DT WLS DIM    
0-10 V Dimming Dual Technology Wall Switch Occupancy Sensor

The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

 

IR VS 1    
Passive Infrared Wall Switch Vacancy Sensor

The IR VS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch vacancy (manual ON) sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

 
 
IR VS 2    
Passive Infrared Wall Switch Vacancy Sensor

The IR VS 2 is a line voltage, two relay, Passive Infrared (PIR) wall switch vacancy (manual ON) sensor intended to control bi-level lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching. 

 
US VS 1    
Ultrasonic Wall Switch Vacancy Sensor

The US VS 1 is a line voltage, single relay, Ultrasonic (40 kHz) wall switch vacancy (manual ON) sensor intended to control lighting in commercial spaces. Ultrasonic is used where the sensor will not have a clear line of site of the occupants in the desired coverage area. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching. 

 
US VS 2    
Ultrasonic Dual Relay Wall Switch Vacancy Sensor
The US VS 2 is a line voltage, two relay, Ultrasonic (40 kHz) wall switch vacancy (manual ON) sensor intended to control bi-level lighting in commercial spaces. Ultrasonic is used where the sensor does not have a clear view of the occupants in the desired coverage area. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.  
 
 
DT VS 1    
Dual Technology Wall Switch Vacancy Sensor

The DT VS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) vacancy (manual ON) sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to maintain the load ON with either or both technologies.  

 
 
DT VS 2    
Dual Technology Dual Relay Wall Switch Vacancy Sensor

The DT VS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch vacancy (manual ON) sensor intended to control bi-level lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies.

 
 
IR WLS 1    
Passive Infrared Wall Switch Occupancy Sensor
The IR WLS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control lighting in commercial spaces.  PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. 
IR WLS 2    
Passive Infrared Dual Relay Wall Switch Occupancy Sensor
The IR WLS 2 is a line voltage, two relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces.  PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. 
US WLS 1    
Ultrasonic Wall Switch Occupancy Sensor
The US WLS 1 is a line voltage, single relay, Ultrasonic (40 kHz) wall switch occupancy sensor intended to control lighting in commercial spaces.  Ultrasonic is used where the sensor will not have a clear line of site of the occupants in the desired coverage area. 
US WLS 2    
Ultrasonic Dual Relay Wall Switch Occupancy Sensor
The US WLS 2 is a line voltage, two relay, Ultrasonic (40 kHz) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces.  Ultrasonic is used where the sensor does not have a clear view of the occupants in the desired coverage area. 
DT WLS 1    
Dual Technology Wall Switch Occupancy Sensor
The DT WLS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control lighting in commercial spaces.  The combination of both technologies enhances occupancy detection in difficult applications. 
DT WLS 2    
Dual Technology Dual Relay Wall Switch Occupancy Sensor
The DT WLS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces.  The combination of both technologies enhances occupancy detection in difficult applications. 

search login