Wall Switch Occupancy Sensor

IR WLS 2-W

Wall Switch Occupancy Sensor

IR WLS 2-W

Item no. 66130

"PIR Wall Switch Occupancy Sensor 2 Button The typical application is for bi-level switching in small office, conference, and break rooms. For best performance use this sensor in enclosed spaces no larger than 18’ x 15’. The IR WLS 2 is a line voltage, two relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching." The typical application is for bi-level switching in small office, conference, and break rooms. For best performance use this sensor in enclosed spaces no larger than 18’ x 15’.

  • PIR (passive infrared) wall switch occupancy sensor
  • Bi-level load switching (2 relays)
  • Line voltage lighting control (120/230/277 VAC, 50/60 Hz)
  • 180° coverage pattern
  • Manual ON or Automatic ON option
  • Light level feature keeps lights OFF when sufficient daylight is present
  • Mounts to a single-gang NEMA-style, standard switch box & decorator-style wall plate by others
  • “Switch Link” communication allows for up to 4 sensors to be grouped together
  • IQ Mode dynamically adjusts the ‘ON’ time delay by learning individual room occupancy
  • Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds
  • Audible alert feature provides an audible warning that theload will shut-OFF in 10 seconds unless additional motion isdetected
  • Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected
  • Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF button